PROFESSIONAL QUALITY: 100% Satisfaction Guaranteed, Trim Paint Brush is Premium; intended to be long lasting and easy to clean. Exceptional ability to get the job done quickly with a superior finish.
FIT FOR COMFORT: Wooden handle brushes are lightweight and easy to hold. A comfort that last for long tedious jobs. Handle allows for the best quality control with exceptional results.
THICK FILAMENTS: These synthetic filaments are designed hold more paint to save you time and give you the finish you are looking for. Filaments are durable and long-lasting.
AFFORDABLE: Don't waste your money on a brush that will last you a hour. These high quality brushes are money savers. The value you get in these brushes are unbelievable for the price.
ANYONE CAN USE: It doesn't matter whether you are a professional or a beginner, this Angle Sash Paint Brush is great for any user.
LESLIE: Now we’ve got Johanna from Michigan who wants to get out and enjoy the deck and has a question about the durability of composite decking. How can we help you with that project?
JOHANNA: Hey. We’re getting ready to put a deck on the back of our house. It’s going to be about 20×20. And we’re looking at the composite products and in doing some research, I have come across some hair-raising images of black mold, chipping, cracking, crumbling and so on. And I would just like to get your opinion on the composite decking and if it truly holds up the way it says it does or if there are things we need to look out for.
TOM: I think it absolutely does hold up. Originally, the very first composite products that were out there had wood fiber in them, as well as the plastics. And the wood fiber would tend to grow sometimes algae and things like that and people didn’t like that.
I think durability of composite decking is a perception issue. If you think that there is zero maintenance – “I’m never going to have to do anything at all” – you’re not going to find any product like that. Because even though it’s composite, it’s going to get dirty, it may grow a bit of algae and need to be cleaned once in a while. But realistically, I think it’s going to stand up a lot better than pressure-treated.
Just give you an example. My son completed his Eagle Scout project years ago. And his project was to build a 30-foot bridge across a stream. And we chose, for that project, composite decking. This is going to be in a park, it’s going to get lots and lots of foot traffic. That was up for a year and it still looked as good as the day we put it down.
So, I think composite is a good choice. Stick with a name brand; stick with Trex, for example. Good product, good history. And I think it’s going to cut down on the maintenance overall because of the durability of composite decking and it’s going to look terrific at the same time. And you won’t have to paint it and stain it and all that.
Now, you realize that you do – the framing of this is all done through standard pressure-treated, right?
JOHANNA: Right, right. And we will have benches and stuff built in and we’re going to use, I think, cedar for that.
TOM: OK. Well, I mean you can use composite for the built-in benches, too. Anything that’s going to be exposed like that, there’s no reason not to use the composite.
JOHANNA: And it’s a very sunny area, so …
TOM: Yeah, if you have a lot of sun, you really won’t have a lot of problems with mildew and algae growth, because the sun is a very natural mildicide. It’s usually the real shady decks that have the issues.
JOHANNA: Yeah. The images I saw were from ’07, ’08. So it made me think, too, maybe there was a bad run at that time?
TOM: And you know what? Composite has changed in the last five years, too.
JOHANNA: OK. Well, good. Thank you very much.
TOM: Alright, Johanna. Good luck with that project and let us know when the party is, OK?
JOHANNA: Hey, it’s next Friday.
TOM: Thanks so much for calling us at 888-MONEY-PIT.
From Source Article: moneypit.com
A ceiling fan is a great way to make any room more comfortable. It can also help reduce your home’s heating and cooling costs. To replace a light fixture with a fan, all you’ll need is about two hours and some basic supplies. Here’s what you’ll need for this intermediate-level project:
TOOLSCircuit Tester Ladder Philips Screwdriver Flat Head Screwdriver Wire Cutter Wire Stripper Tongue & Groove Pliers Mini Hacksaw
MATERIALSElectrical Tape Ceiling Fan Cable Clamp Connectors Electrical Box – Fan Rated And/or Fan Hanger Kit
To replace a light fixture, be sure to equip yourself with the proper safety gear. Throughout the video, we’ll alert you regarding when you should and should not use the safety gear.
Turn off circuit. Start by turning off the breaker connected to the circuit you’ll be working on. Confirm the power is off by switching on the fixture. If it doesn’t turn on, you’re ready to begin.
Remove old fixture. Remove the glass cover and light bulbs from your old fixture. Fixtures are typically held in place with screws and a mounting strap. Loosen the screws, twist the base and then pull the base over the hole. Test each wire with a non-contact circuit tester to avoid dangerous shocks.
Disconnect old fixture and strap. Cut any wires connected to the old fixture and, if necessary, remove the mounting strap. Remove the wire nuts, untwist the wires, and disconnect the ground wire from the fixture box with a screwdriver. You’ll be left with a white wire, a black wire, and a bare wire.
Remove old fixture box. Conventional light fixture boxes aren’t strong enough to support a fan, so you’ll need to replace it with one that’s fan rated. If your current fixture box is screwed to a ceiling joist, simply remove the screws. If it’s nailed to a joist accessible from an attic, use a hammer or pry bar to remove the box and nails. If your fixture box is hanging from a strap, remove the nut or screw holding it in place. You may need to use a mini hacksaw to remove the strap to make room for the new electrical box.
Install brace. Your fan-rated box will need to be supported by ceiling joists. If you have an attic that enables access from above, you can use a box that attaches to the joist. Without attic access, you’ll need a fan brace that can be installed from below. Fan braces are typically sold as a kit that includes a brace, box and bracket or U-bolt. Slip the brace into the ceiling hole with its feet on the inside of the drywall and its bar centered over the hole. Twist the bar until both ends meet the joists, then tighten with tongue and groove pliers.
Prep new box. Preparing your new fixture box before you install it will make installation much easier. Start by punching out holes for your wires, then install cable connectors, making sure you’ll be able to access the screws if you need to make adjustments. Screw the green grounding screw into the designated hole.
Install box. Slip the U-bolt or bracket over the brace, then feed the wires through the cable connectors. Line up the bracket and box screw holes, then secure the nuts provided in your kit. This may take a little patience.
Install fan mounting bracket. This installation features a pass-through, with light switches on each side of the room and two sets of wires. You’ll need to prep these wires before installing the mounting bracket. To do this, screw the ground wire into the box, using the extra wire to twist both ground wires together. If necessary, use wire strippers to remove about three-eighths of an inch of insulation from each wire. Twist the black wires together and secure with a wire connector. These wires are a pass-through. You won’t need them when installing the fan. Twist the white wires together, then attach the mounting bracket to the fan box using the screws included in your kit.
Assemble and attach blades. Each blade typically features three holes to attach it to the fan or blade irons. Attachment methods vary, so be sure to check manufacturer instructions before you begin. Attach each blade to the bottom of the motor with the screws provided, making sure each is tight.
Secure down rod to motor. Secure the down rod to the motor. In most cases, the down rod will be threaded into the motor housing and secured with one or more setscrews.
Prepare wires and hang fan. Place the canopy over the down rod, leaving it loose. Then hang the motor by inserting the ball on the down rod into the bracket.
Wire the fan. The fan motor’s grounding wire is typically green, bare or sometimes covered in a color noted by the manufacturer. There may also be a grounding wire attached to the hanger. Use a wire connector to secure them to the ground wire from the power cable. Connect the white wire from the box to the white fan wire and the black wire from the box to the black fan wire. Secure the canopy against the ceiling with screws provided.
Assemble the light fixture. Attach the fixture according to the manufacturer’s instructions and install light bulbs. Turn on the power at the breaker box and enjoy the cool breeze coming from your new fan!
The post How To Replace A Light Fixture With A Ceiling Fan | Video appeared first on The Money Pit.
From Source Article: moneypit.com