LESLIE: Elvis from Texas is on the line. He is in the building and he has a question about leaking Kitec plumbing pipes.
Elvis, what can we do for you?
ELVIS: My wife and I had a house built. Started back in early 2005 and it’s in Lubbock. Houses are made on concrete slabs.
ELVIS: Before they poured the slab, they put in a – with all the plumbing was installed. And instead of copper plumbing, which was in kind of short supply back in 2005, the going thing then was called Kitec. I think it’s K-i-t-e-c. And it’s a double-walled plastic pipe with aluminum in the center, instead of regular connections that use, if I’m understanding, a bronze connector. And we’ve had a couple of small problems with the plumbing but it seems as though I’ve read that the bronze can cause a delinkification (ph) in the copper.
And I’m wondering if there’s been any studies done, if there’s different fittings that can be replaced. If the plumbing has to be replaced, it’d be very labor-intensive to go underneath the house. And we get down to fairly low winters, maybe to zero, and I don’t think I’d want any plumbing overhead for it to freeze. Or if you have any suggestions or thoughts.
TOM: Yeah, Elvis. The problem with Kitec plumbing is, as you suspect, the fittings will leak.
Now, what’s interesting is that Kitec starts with PEX, which is cross-linked polyethylene which, by itself and as installed today, is actually an excellent plumbing pipe with fittings that don’t leak. But the Kitec system has definitely had a history of leaking. In fact, there are many class-action lawsuits over that product that are active and going on around the country. And you certainly should investigate those that you may qualify to join.
Unfortunately, your solutions only include, really, replacing the leaking Kitec plumbing pipes. And what I would advise you to do is to only replace it where it’s accessible. I mean I wouldn’t create the emergency if the emergency doesn’t exist, so I’m not going to tell you to tear open your walls and pull all the plumbing out and start from scratch. But I would say that if you do happen to be doing a bathroom renovation or you open a wall and you find Kitec, it should be sort of a matter, of course, where you always replace it. Because it’s not going to get any better; it’s only going to get worse.
ELVIS: Not news I wanted to hear but kind of what I suspected.
TOM: Yep. Unfortunately, that’s the case. Every once in a while, we get a building product like leaking Kitec plumbing pipes and I’ve seen it happen many times over the years. And there’s just no way to make it better because at its core, it’s a defective system.
ELVIS: OK. No way to just replace the fittings. It’s going to be the type that has problems.
TOM: That’s correct. So I would attach it to a plumbing – to copper piping or to traditional PEX piping.
ELVIS: OK. So I can talk with some local plumbers and discuss it from that point.
From Source Article: moneypit.com
Your kitchen cabinets work hard. They’re constantly opened and closed, pots and pans nick and ding them, canned goods scrape away the finish, and handles and hinges wear out. Replacing them is an expensive, time-consuming and difficult task. The good news is, you can make a major improvement in their appearance and function with very little experience and just a few materials in a couple of days. Here are some of the easiest ways to upgrade kitchen cabinets and improve your kitchen.Re-Paint
Freshen up the look of your cabinets with a light, bright paint color. It takes a minimal amount of supplies, including a gallon or two of paint, a good quality paint brush, paint tray, screwdriver and a bit of sandpaper. Once you have the materials, follow these simple steps.Remove the cabinet doors from the base. Take off the hinges and knobs and set aside somewhere safe. Thoroughly clean the doors and cabinet interiors to remove grease and debris. Sand off any rough edges, bumps and imperfections. Clean away the dust from sanding. Lay the doors flat on an elevated surface so you don’t have to bend over too far. Apply a thin coat of paint to one side of the cabinet doors and let dry. Repeat for the other side. Apply a thin coat of paint to the interior of the cabinet and stiles. Sand your first layer of paint, wipe off the dust and apply at least one more coat. Note, you may need to apply a third coat of paint to get a nice, smooth finish. If so, sand in between. Replace the hardware and knobs and re-hang the cabinet doors. Add Some Personality
You have a unique style and personality, and you want your entire home to reflect that. Making your kitchen one of a kind is a fun and easy project that won’t take much time, resources or experience. Here are some interesting ideas that you might want to incorporate to upgrade kitchen cabinets:Remove the Upper Cabinet Doors Just take a screwdriver and remove the hinges that hold the door in place. Discard the doors, or set them aside for a future project. Fill in the holes left by the hinge screws with wood filler, let dry and sand smooth. Apply a fresh coat of paint to the insides and styles in a complimentary color to the rest of your cabinets. Put your best dinnerware, glassware and serving dishes in the now open cabinet. Apply Wallpaper To A Recessed Panel Paint the doors according to the above instructions. Carefully measure and cut a piece of wallpaper you like. Apply spray adhesive to the back of the paper. Place the paper on the door and smooth it out to remove bubbles and ripples. Apply a thin coat of decoupage medium over the entire door front and let dry. Upgrade The Door Knobs
Find unique knobs that appeal to your sense of style. Remove the old knobs and determine whether the new ones will use the same holes. If you’ve chosen a new style, fill the old holes with wood filler, let dry and sand. Apply a light, quick coat of paint to the newly patched holes. Decide where your new handles will be placed and mark out where the holes should be. Drill a pilot hole for the new screws. Install your new knobs according to the directions. Kitchen Cabinet LED Lighting
Installing battery operated lights that can be turned on with a simple tap will help you see into the darkest corners of your cabinets with ease and help you upgrade kitchen cabinets. They’re easy to install; in fact, most come with a peel-and-stick adhesive pad that will grip the surface quite well.
Updating your kitchen doesn’t have to break your budget, take up all of your time, or involve a professional contractor. With a little imagination, some basic tools and materials and a free weekend, you can upgrade kitchen cabinets and have a gorgeous new kitchen that you’ll enjoy for years to come.
From Source Article: moneypit.com
For Interior and exterior use, the whole room painting best choice
Perfect for DIY renovators to quickly and easily repair, repaint and redecorate
Includes 3 inch Paint Brush, 2inchFoam Brush, Roller Frame,Paint Tray, Drop Sheet, Mixing Paddle, Paint Can Opener
This paint tray set is high quality intended to be long lasting and easy to clean