Every new year ushers in some of the harshest weather, and it’s easy to get caught up in your family’s winter safety concerns: from all-weather tires to snow boots, from draft sealers to space heaters. But don’t forget that your pets are members of the family, too, and even the most outdoor-loving dog can suffer the ill effects of winter weather as easily as humans.
Depending on your type of dog and your budget, there are dozens of ways to ensure your best friend stays happy and healthy. This winter, give a thought to your dog’s safety and comfort with these cutting-edge pet gadgets.Custom Dog Coat
You shop for the best performing winter gear for yourself — so why not for your dog? You might think a dog’s natural coat helps protect him from the cold, but if your pet spends most time indoors, he may not have had the opportunity to gradually develop a thicker coat that will keep him sufficiently warm. Short-haired dogs may not develop a thicker coat at all and require some man-made help.
You don’t have to worry about fit when you order a custom-made dog coat like those from Alphenhitze. Custom dog coats are made to your pet’s measurements using high-performance cold weather fabric that’s lightweight, weather-tough and toasty warm. Thoughtful details provide top-notch winter protection, like a removable collar that’s engineered not to flap in the wind and specially designed hind-quarters that completely cover the dog’s hips. Alphenhitze custom dog coats even include reflective trim for nighttime visibility. Cost can range from around $80 to around $230, largely dependent on the size of your dog.
If you notice your dog lifting its paws and whining during a walk, the ground or pavement may be making his paws painfully cold. Sidewalk salt and chemical ice melt products can also be dangerous to your dog’s paws. By outfitting your dog in protective dog boots, you can save him a lot of discomfort, and keep him romping in the snow a lot longer. Today’s high tech doggie boots for all kinds of weather, and specially designed to lend traction on slippery surfaces. They’re easy to get on and off your dog’s feet and they’re machine washable.
Heated Dog Bed
Once your dog is safely back indoors, help her warm up in a hurry with a toasty warm dog bed. Products like a dog bed heating pad provide a cordless option, warming up in the microwave in five minutes or less. Once warm, simply slide the pad under your pet’s bedding and she’ll enjoy up to ten hours of safe, comforting warmth. Alternatively, electric pet bed warmers allow you to add thermostatically controlled warmth to whatever area your dog chooses to lounge. Most will heat up only when your dog is present and they comes in different sizes. Note that electric beds area not recommended for “chewers”, due to the electrical cord — unless you also buy a cord protector like the CritterCord, which deters pets from chewing.Dog House Heating System
Some pet owners don’t allow their dogs indoors, and some dogs like their dog houses too much to mind. But if it gets cold enough, even the toughest mutt might complain! That’s when you might consider outfitting Fido’s dog house with its own heating system. For example, the Hound Heater Deluxe Dog House Furnace by Akoma features a long-life heating element for many years of reliable use and can be used for most dog and cat houses up to 75 cubic, but also works well for smaller cat and dog houses.
Whether you do your dog a favor by simply moving his pet bed out of a drafty area, or go all-out and install a heating system in his dog house, be kind to your dog this winter. Keep your beloved pets as safe and warm as you want to be.
The post 4 Tips to Keep Dogs Safe and Comfortable in Winter appeared first on The Money Pit.
From Source Article: moneypit.com
LESLIE: Elvis from Texas is on the line. He is in the building and he has a question about leaking Kitec plumbing pipes.
Elvis, what can we do for you?
ELVIS: My wife and I had a house built. Started back in early 2005 and it’s in Lubbock. Houses are made on concrete slabs.
ELVIS: Before they poured the slab, they put in a – with all the plumbing was installed. And instead of copper plumbing, which was in kind of short supply back in 2005, the going thing then was called Kitec. I think it’s K-i-t-e-c. And it’s a double-walled plastic pipe with aluminum in the center, instead of regular connections that use, if I’m understanding, a bronze connector. And we’ve had a couple of small problems with the plumbing but it seems as though I’ve read that the bronze can cause a delinkification (ph) in the copper.
And I’m wondering if there’s been any studies done, if there’s different fittings that can be replaced. If the plumbing has to be replaced, it’d be very labor-intensive to go underneath the house. And we get down to fairly low winters, maybe to zero, and I don’t think I’d want any plumbing overhead for it to freeze. Or if you have any suggestions or thoughts.
TOM: Yeah, Elvis. The problem with Kitec plumbing is, as you suspect, the fittings will leak.
Now, what’s interesting is that Kitec starts with PEX, which is cross-linked polyethylene which, by itself and as installed today, is actually an excellent plumbing pipe with fittings that don’t leak. But the Kitec system has definitely had a history of leaking. In fact, there are many class-action lawsuits over that product that are active and going on around the country. And you certainly should investigate those that you may qualify to join.
Unfortunately, your solutions only include, really, replacing the leaking Kitec plumbing pipes. And what I would advise you to do is to only replace it where it’s accessible. I mean I wouldn’t create the emergency if the emergency doesn’t exist, so I’m not going to tell you to tear open your walls and pull all the plumbing out and start from scratch. But I would say that if you do happen to be doing a bathroom renovation or you open a wall and you find Kitec, it should be sort of a matter, of course, where you always replace it. Because it’s not going to get any better; it’s only going to get worse.
ELVIS: Not news I wanted to hear but kind of what I suspected.
TOM: Yep. Unfortunately, that’s the case. Every once in a while, we get a building product like leaking Kitec plumbing pipes and I’ve seen it happen many times over the years. And there’s just no way to make it better because at its core, it’s a defective system.
ELVIS: OK. No way to just replace the fittings. It’s going to be the type that has problems.
TOM: That’s correct. So I would attach it to a plumbing – to copper piping or to traditional PEX piping.
ELVIS: OK. So I can talk with some local plumbers and discuss it from that point.
From Source Article: moneypit.com
Not every room has instant architectural interest, but you can create a dynamic look by installing molding that is reasonably priced, paintable and offered at any home improvement center. Here are just a few of the many affordable ways installing molding and trim can give a space an expensive look.Add crown molding to a room, and you also add pedigree. Profiles range from simple to elaborate, and some can create the illusion of a sculpted ceiling. Install a chair rail to add elegance and definition to a space. This element also creates the opportunity to marry two complementary colors or a solid color and pattern for additional visual interest. Use a small crown molding and parallel trim piece to make a frieze along the top perimeter of a room, and paint a border design or apply texture or an allover pattern between the boundaries. Apply beautiful pieces of wallpaper directly to a wall and then trim out with decorative molding for a pretty framed-art effect. Or swap in solid color as a backdrop to a collection of framed photos or other keepsakes. Change a room’s mood by installing molding and painting with colors from a tone-on-tone palette or by using contrasting colors for dramatic effect.
Installing molding is also becoming simpler as smart manufacturing ratchets down the skill levels required. For example, So Simple Crown Molding is made out of foam and can be help in place with just caulk. Plus, all corners are pre-cut which eliminates the most difficult crown molding installation step, cutting a compound-miter corner.
From Source Article: moneypit.com