Butterflies are lovely things and one of the wonderful aspects of spring and summer. They are not only beautiful but needed as pollinators for gardens. If you want to attract butterflies to your yard you have to understand what they need. The answer is nectar.
Nectar is life to butterflies, so by planting the right flowers and flowering bushes, butterflies will gladly stop by to feed. This needs to include not only flowers that will supply their nectar but plants they can lay their eggs on and will feed the larvae. Butterflies love areas where they can access plenty of nectar, is sunny, provides water and protects them from the wind.Best five flowers to attract butterflies to your yard
The “Buddleia davidii” or Butterfly Bush is by far the best choice when it comes to a butterfly garden. The plant itself is also called Summer Lilac and is beautiful. Plus each plant can handle a lot of butterflies feeding at the same time. It’s attractive to a variety of butterfly species. It’s simply stunning to see hundreds of butterflies feeding on this brightly colored plant.
The Butterfly Bush likes full sun. They are tall plants so place them towards the back of your flower garden. They give off a lovely scent, are very hardy and drought resistant. They can be grown pretty much anywhere in the U.S.Butterfly Weed
Asclepias, also know as Butterfly Flower or Butterfly Weed is another must-have for butterfly lovers. This one does dual duty. It not only supplies nectar for adult butterflies but is a host plant for caterpillars. The Butterfly Weed helps keep species like the Monarch butterfly thriving as the plant itself contains a toxic substance that makes the caterpillars taste nasty to predators. Hummingbirds also love the Butterfly Weed.
There are many varieties of Asclepias to choose from in a gorgeous array of colors. The plant likes full sun, is drought resistant and actually prefers somewhat dry soil. They are low maintenance and easy to grow. The milky substance that protects the caterpillar may irritate the skin so when pruning you may want to wear gloves.Coneflower
The coneflower or Echinacea is third on our list of plants butterflies love. The Purple Coneflower is a beautiful native perennial that grows all over the U.S. Echinacea comes in a variety of colors besides purple including red and yellow. Native insects such as butterflies and bees love this medicinal herb. It also provides a winter food source for birds.
Coneflowers are very easy to grow. They are drought resistant, cold hardy and will grow just about anywhere. The large flowers bloom over a long period of time so you will have them through several seasons. A must for any serious butterfly gardener.Asters
The Aster family includes several varieties and all are beautiful with their blue and violet hues. The nice thing about this butterfly attracting plant is it blooms late summer and fall. This means it will attract butterflies for a longer time in your garden. Asters, like the Butterfly Weed, not only provide succulent nectar but is a host plant as well.
Asters are drought tolerant and like full sun. They don’t require anything special in the way of soil which means they will grow well in most gardens. Plant them with other butterfly loving perennials.Salvia
Salvia is another must for anyone wanting to attract butterflies, hummingbirds and honey bees. Butterflies like the American Lady, Clouded Skipper, Fiery Skipper, Monarch, and Spicebush Swallowtail love Salvias. The Salvia plant produces rich nectar even in drought conditions which is needed as a food source in extremely dry weather. Red is a favorite if you want to attract hummingbirds too.
Salvia loves full sun, is drought resistant and hardy. They all love hot summers and some varieties are winter hardy as well. Easy to grow they add bright color to any garden.
Flutter By Butterfly
These five plants are just the beginning but definitely where you want to start with when planning a butterfly garden. Other plants that easily attract butterflies include Lantana, Black-eyed Susan, Daisy, Goldenrod and Snapdragons. Start planning now and you will be enjoying all those beautiful butterflies fluttering by from spring through fall.
The post Attract Butterflies to Your Garden with These Five Flowers appeared first on The Money Pit.
If you’re anything like us, you love to spoil your dog. Elevate your pooch’s meals with a raised dog feeder. Not only will it take the strain off his or her neck, it will also add some rustic flair to your home. With only a few power tools and a couple cuts, you’ll have this inexpensive feeder ready in time for their next meal. Here’s what you’ll need to take on this fun project:
TOOLS & MATERIALSTape Measure Pencil Carpenter’s Square Mouse Detail Sander or Orbital Sander Cordless Drill/Driver 7/8” Spade Drill Bit 3/8” Drill Bit Jig Saw with Wood Blade 1” x 12” x 24” Wood Board ½” x 12” Iron Pipe (4) ½” Iron Cap (4) ½” Iron Pipe Connector (4) ½” Iron Coupling (8) Stain Foam Brushes Rags 6”-9” Food Bowls (2) Drop Cloth Nitrile Gloves Painter’s Pyramids (Optional)
When taking on this DIY task, be sure to equip yourself with the proper safety gear.
SAFETY GEAREye Protection Ear Protection Mask
Mark board. Start by marking your board at 6, 12, and 18 inches. Then using a carpenter’s square, draw a straight line at the center of the board and the center of each side. Place your bowls upside down centered on each half of the board and trace their shape onto the wood. Mark one inch in from each corner. This is where you’ll drill holes for your feeder’s pipe legs.
Drill holes. With a 7/8 inch spade bit, drill leg holes at each corner. Then with a 3/8 inch bit, drill one hole 5/8 of an inch inside each food bowl circle. These will help you get your jig saw cuts started that you’ll make in the next step.
Cut bowl holes. Place your jig saw blades in the holes you just drilled and make a circular cut out about ¼ inch smaller than your trace line. This is give your dogs bowls an edge to rest on. Don’t worry if your cutouts aren’t perfect circles. They’ll be covered by the lip of the food bowls.
Sand. Test fit your bowls. Then sand your board as needed for a snug fit. Continue sanding your entire build until smooth. If you see any pencil marks, be sure to sand those off as well.
Stain. Wipe your board with a rag. Apply stain with a foam brush until you have the look you want, and let dry according to manufacturer’s instructions.
Install legs. Attach a coupling to both sides of each pipe. Then attach a connector to one side of each. Feed each pipe, connector end first, through the bottom of each corner hole, and secure with a cap on the top side of the board. Set your new feeder upright. Put the bowls in place. Call your dog for dinner. Step back and revel in your DIY skills!
From Source Article: moneypit.com
LESLIE: Mary in Texas is on the line and has an issue with a tub drain clog. Tell us what’s going on.
MARY: We have a bathtub that we’ve had plumbers out and they can’t even seem to get it unstopped. They think that it – and it was – would slowly – if you took a shower in there, it would slowly go out that day. But then it stopped up and it was going so slowly.
We called up a big company here – plumbing company – and the guy came out and checked it. And he couldn’t get it unstopped. He thinks it’s in the P-trap. But he checks, he lined the hat – the tub is on the back of the house. About 2 feet from that is the clean-out. And he took a picture in the clean-out, all the wall to the alley and told us to get the city to come. And they needed to clean it out, the alley. They did that.
TOM: So wait a minute. You’re telling me that the plumber was able to clear the drain from the house to the street but he thinks that the restriction is beyond that?
MARY: Yeah. He thinks – and it’s just about 2 feet from the drain. The tub that’s on the back wall of the house, it’s about 2 feet to the clean-out where he worked. And all the other lines are back farther. I mean the utility line is farther. It’s on that same line. It’s farther. The sink in the vanity area and the commode where it’s just fine – it’s right by the tub. It’s just – it’s past them.
TOM: I can tell you right now that he missed something in the tub, because all of those plumbing lines come together in that same general area. And if you’ve got flow from the toilet and the sinks and everything else but not the tub, it’s going to be the tub itself.
When it comes to clearing a tub drain clog, my experience has been that plumbers are not the best ones to do that. Generally, you’re better off to go with a specialty plumber that does drain cleaning. They have the tools, the equipment and the knowledge to get that done. And sometimes, the day-to-day plumbers – if it’s a simple clog, they can clear it but they don’t necessarily have the tools. For example, drain cleaners have cameras that can go down those pipes and see exactly what the obstruction is.
So, my recommendation would be to call a different kind of professional: not a plumber but someone that specializes in drain cleaning and has a good reputation for being able to take care of a tub drain clog. I think that’s going to be the easiest way for you to get to the bottom of it. I would not recommend any type of additive to that drain to try to clear it and these liquid products that clear drains, because they can be very, very corrosive.
Mary, good luck with that project.
From Source Article: moneypit.com